yooTen Sensors

Thermal management is a critical aspect of automotive design, yet compared to many other components, there is a noted lack of options when it comes to multi-channel remote temperature sensors.

Release of Vector X2 to V1.5--Vector X2 is one operating system for sensors and controllers offering identical functionality and configuration procedure over an entire range of products including sensors, wall – and cabinet mounted controllers.

Vector Controls SRD2 is a programmable indoor controller and transmitter with a wide range of built-in sensors such as temperature, humidity, CO2, VOC air quality, dust particle and motion (PIR).

Gems liquid level sensors and switches provide high-reliability monitoring and detection of a wide range of fluid media. Requirements can range anywhere from the sensing of cooking oil, to hydraulic fluids, to diesel fuel tanks, to water and wastewater, to biohazards, to even deionized or potable water.

Introducing Flow Sensors, Gems Sensors RFS Type Flow Switch P/N155425. Gems RotorFlow Flow Switches build an extra level of reliability and protection into your equipment. By principle of operation, the rotor cannot be deceived into indicating a positive flow situation when no flow actually exists.

Gems LS-7 Series 131100 Level Switches are ideal for high volume use in small tanks and vessels. Polypropylene, Nylon or Versplast options are available. Polypropylene is ideal for potable water and broad chemicals, Nylon is ideal for oils and fuels and Versaplast is ideal for corrosive fluids.

Installation Orientation. A standard NPT female boss in the top of the tank, bottom or side is all that is required for rapid installation. Units operate normally in any attitude --from the vertical to a 30° inclination - with lead wires up or down. Standard IPS pipe extends units to any intermediate level in the tank.

Closense CSP6189-E-G30G-00 is a high-quality pressure transmitter with excellent performance and stability. It provides a 1/4NPT external thread pressure interface, measuring a pressure range of 0-300 PSI G, and outputting a 1-5V voltage signal.

The model 558.9401015201 provides a measurement range of 0-60bar and an output signal of 0-5V, and its 7/16-20 UNF pressure thread is suitable for hydrogen measurement applications. The compact and robust design of Huba 558.9401015201 meets the requirements of the road vehicle standard ISO 16750 for shock and vibration stability. Suitable for hydrogen-fueled vehicles.

The 2641001WD11T1C is a C264 pressure transmitter with 2 wires 4-20mA output in one direction. For unidirectional or bidirectional pressure ranges, Setra's 264 Series measures differential or gauge pressure and converts this differential pressure into a proportional electrical signal output.